74VCX08MTC资料

74VCX08 Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and OutputsJuly 1999

Revised February 2005

74VCX08

Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and Outputs

General Description

The VCX08 contains four 2-input AND gates. This productis designed for low voltage (1.2V to 3.6V) VCC applicationswith I/O compatibility up to 3.6V

The VCX08 is fabricated with an advanced CMOS technol-ogy to achieve high-speed operation while maintaining lowCMOS power dissipation.

Features

s1.2V to 3.6V VCC supply operations3.6V tolerant inputs and outputss tPD

2.8 ns max for 3.0V to 3.6V VCC

sPower-off high impedance inputs and outputssStatic Drive (IOH/IOL)

r24 mA @ 3.0V VCC

sUses patented Quiet Series¥ noise/EMI reduction circuitrysLatchup performance exceeds 300 mAsESD performance:

Human body model ! 2000VMachine model ! 250V

sLeadless Pb-Free DQFN package

Ordering Code:

Order Number74VCX08M(Note 1)74VCX08BQX(Note 2)74VCX08MTC(Note 1)

74VCX08MTCX_NL(Note 3)

PackageNumberM14A

Package Description

14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150\" Narrow

MLP014A Pb-Free 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC

MO-241, 2.5 x 3.0mmMTC14MTC14

14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm WidePb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

Pb-Free package per JEDEC J-STD-020B.

Note 1: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.Note 2: DQFN package available in Tape and Reel only.

Note 3: “_NL” indicates Pb-Free package (per JEDEC J-STD-020B). Device available in Tape and Reel only.

Quiet Series¥ is a trademark of Fairchild Semiconductor Corporation.

© 2005 Fairchild Semiconductor CorporationDS500165www.fairchildsemi.com

元器件交易网www.cecb2b.com

74VCX08Logic Symbol

IEEE/IEC

Connection Diagrams

Pin Assignments for SOIC and TSSOP

Pin Descriptions

Pin NamesAn, BnOn

DescriptionInputsOutputs

Pad Assignments for DQFN

(Top View)

www.fairchildsemi.com2

元器件交易网www.cecb2b.com

74VCX08Absolute Maximum Ratings(Note 4)

Supply Voltage (VCC)DC Input Voltage (VI)Output Voltage (VO)

HIGH or LOW State (Note 5)VCC 0V

DC Input Diode Current (IIK) VI 󰀟 0V

DC Output Diode Current (IOK)VO 󰀟 0VVO ! VCC

DC Output Source/Sink Current (IOH/IOL)DC VCC or Ground Current perSupply Pin (ICC or Ground)Storage Temperature Range (Tstg)

󰀐0.5V to 󰀎4.6V󰀐0.5V to 󰀎4.6V󰀐0.5V to VCC 󰀎0.5V

󰀐0.5V to 󰀎4.6V

󰀐50 mA󰀐50 mA󰀎50 mA󰀎50 mAr100 mA

󰀐65qC to 󰀎150qC

Recommended Operating Conditions (Note 6)

Power SupplyOperatingInput VoltageOutput Voltage (VO)HIGH or LOW StateOutput Current in IOH/IOLVCC 3.0V to 3.6VVCC 2.3V to 2.7VVCC 1.65V to 2.3VVCC 1.4V to 1.6VVCC 1.2V

Free Air Operating Temperature (TA)Minimum Input Edge Rate ('t/'V)Vin 0.8V to 2.0V, VCC 3.0V

10 ns/V

Note 4: The Absolute Maximum Ratings are those values beyond whichthe safety of the device cannot be guaranteed. The device should not beoperated at these limits. The parametric values defined in the ElectricalCharacteristics tables are not guaranteed at the Absolute Maximum Rat-ings. The “Recommended Operating Conditions” table will define the condi-tions for actual device operation.

Note 5: IO Absolute Maximum Rating must be observed.Note 6: Floating or unused inputs must be held HIGH or LOW

1.2V to 3.6V

󰀐0.3V to 3.6V

0V to VCC

r24 mAr18 mAr6 mAr2 mAr100 PA

󰀐40qC to 󰀎85qC

DC Electrical Characteristics

SymbolVIH

Parameter

HIGH Level Input Voltage

Conditions

VCC(V)2.7 to 3.62.3 to 2.71.65 to 2.31.4 to 1.61.2

VIL

LOW Level Input Voltage

2.7 to 3.62.3 to 2.71.65 to 2.31.4 to 1.61.2

VOH

HIGH Level Output Voltage

IOH 󰀐100 PAIOH 󰀐12 mAIOH 󰀐18 mAIOH 󰀐24 mAIOH 󰀐100 PAIOH 󰀐6 mAIOH 󰀐12 mAIOH 󰀐18 mAIOH 󰀐100 PAIOH 󰀐6 mAIOH 󰀐100 PAIOH 󰀐2 mAIOH 󰀐100 PA

2.7 to 3.62.73.03.02.3 to 2.72.32.32.31.65 to 2.31.651.4 to 1.61.41.2

VCC - 0.22.22.42.2VCC - 0.22.01.81.7VCC - 0.21.25VCC - 0.21.05VCC - 0.2

V

Min2.01.60.65 x VCC0.65 x VCC0.65 x VCC

0.80.70.35 x VCC0.35 x VCC0.05 x VCC

VV

Max

Units

3www.fairchildsemi.com

元器件交易网www.cecb2b.com

74VCX08DC Electrical Characteristics (Continued)

SymbolVOL

Parameter

LOW Level Output Voltage

IOL 100 PAIOL 12 mAIOL 18 mAIOL 24 mAIOL 100 PAIOL 12 mAIOL 18 mAIOL 100 PAIOL 6 mAIOL 100 PAIOL 2 mAIOL 100 PA

IIIOFFICC'ICC

Input Leakage CurrentPower Off Leakage CurrentQuiescent Supply CurrentIncrease in ICC per Input

0 d VI d 3.6V0 d (VI, VO) d 3.6VVI VCC or GNDVCC d VI d 3.6VVIH VCC 󰀐0.6V

Conditions

VCC(V)2.7 to 3.62.73.03.02.3 to 2.72.32.31.65 to 2.31.651.4 to 1.61.41.21.2 to 3.6

01.2 to 3.61.2 to 3.62.7 to 3.6

Min

Max0.20.40.40.550.20.40.60.20.20.20.350.05r5.01020r20750

PAPAPAPAVUnits

AC Electrical Characteristics (Note 7)

SymboltPHLtPLH

CL 15 pF, RL 2k:

tOSHLtOSLH

Output to Output Skew(Note 8)

CL 15 pF, RL 2k:

Note 7: For CL pF, add approximately 300 ps to the AC maximum specification.

Note 8: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. Thespecification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH).

Parameter

Propagation Delay

Conditions

CL 30 pF, RL 500:

VCC(V)3.3 r 0.32.5 r 0.21.8 r 0.151.5 r 0.11.23.3 r 0.32.5 r 0.21.8 r 0.151.5 r 0.11.2

TA 󰀐40qC to 󰀎85qCMin0.60.81.01.01.5

Max2.83.77.414.837.00.50.50.751.51.5

Units

FigureNumberFigures 1, 2

ns

Figures 3, 4

CL 30 pF, RL 500:

ns

www.fairchildsemi.com4

元器件交易网www.cecb2b.com

74VCX08Dynamic Switching Characteristics

SymbolVOLP

Parameter

Quiet Output Dynamic Peak VOL

Conditions

CL 30 pF, VIH VCC, VIL 0V

VCC(V)1.82.53.3

VOLV

Quiet Output Dynamic Valley VOL

CL 30 pF, VIH VCC, VIL 0V

1.82.53.3

VOHV

Quiet Output Dynamic Valley VOH

CL 30 pF, VIH VCC, VIL 0V

1.82.53.3

TA 25qCTypical0.250.60.8󰀐0.25󰀐0.6󰀐0.81.51.92.2

VVVUnits

Capacitance

SymbolCINCOUTCPD

Input CapacitanceOutput Capacitance

Power Dissipation Capacitance

Parameter

Conditions

VI 0V or VCC, VCC 1.8V, 2.5V or 3.3VVI 0V or VCC, VCC 1.8V, 2.5V or 3.3V

VI 0V or VCC, f 10 MHz, VCC 1.8V, 2.5V or 3.3V

TA 󰀎25qCTypical6.07.020.0

UnitspFpFpF

AC Loading and Waveforms (VCC 3.3V r 0.3V to 1.8V r 0.15V)

FIGURE 1. AC Test CircuitTESTtPLH, tPHL

SWITCHOpen

FIGURE 2. Waveform for Inverting and Non-inverting FunctionsSymbolVmiVmo

VCC

3.3V r 0.3V1.5V1.5V

2.5V r 0.2VVCC/2VCC/2

1.8V r 0.15VVCC/2VCC/2

5www.fairchildsemi.com

元器件交易网www.cecb2b.com

74VCX08AC Loading and Waveforms (VCC 1.5 r 0.1V to 1.2V)

TESTtPLH, tPHLtPZL, tPLZtPZH, tPHZ

SWITCHOpen

VCC x 2 at VCC 1.5V r 0.1V

GND

FIGURE 3. AC Test Circuit

FIGURE 4. Waveform for Inverting and Non-Inverting Functions

SymbolVmiVmo

VCC1.5V r 0.1VVCC/2VCC/2

www.fairchildsemi.com6

元器件交易网www.cecb2b.com

74VCX08Tape and Reel Specification

Tape Format for DQFN

Package

Designator

BQX

TapeSectionLeader (Start End)

CarrierTrailer (Hub End)

TAPE DIMENSIONS inches (millimeters)

NumberCavities125 (typ)300075 (typ)

CavityStatusEmptyFilledEmpty

Cover TapeStatusSealedSealedSealed

REEL DIMENSIONS inches (millimeters)

TapeSize

12 mm

A13.0(330.0)

B0.059(1.50)

C0.512(13.00)

D0.795(20.20)

N2.165(55.00)

W10.488(12.4)

W20.724(18.4)

7www.fairchildsemi.com

元器件交易网www.cecb2b.com

74VCX08Physical Dimensions inches (millimeters) unless otherwise noted

14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150\" Narrow

Package Number M14A

www.fairchildsemi.com8

元器件交易网www.cecb2b.com

74VCX08Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

Pb-Free 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm

Package Number MLP014A

9www.fairchildsemi.com

元器件交易网www.cecb2b.com

74VCX08 Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and OutputsPhysical Dimensions inches (millimeters) unless otherwise noted (Continued)

14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

Package Number MTC14

Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied andFairchild reserves the right at any time without notice to change said circuitry and specifications.LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILDSEMICONDUCTOR CORPORATION. As used herein:1.Life support devices or systems are devices or systemswhich, (a) are intended for surgical implant into thebody, or (b) support or sustain life, and (c) whose failureto perform when properly used in accordance withinstructions for use provided in the labeling, can be rea-sonably expected to result in a significant injury to theuser.www.fairchildsemi.com

10

2.A critical component in any component of a life supportdevice or system whose failure to perform can be rea-sonably expected to cause the failure of the life supportdevice or system, or to affect its safety or effectiveness.

www.fairchildsemi.com